Flask Accessories
Chemglass Life Sciences 3-Port SST Dip Tube Assy for 500mL Spinner Flasks
Our hose barbed 3-port drip tube assemblies are designed for addition or sampling gof media from Angled Side Arm (ASA) Spinner Flasks.The dip tube assemblies are constructed of 316L stainless steel, electropolished to a 20Ra (or better) finish and include a blue PP GL-45 open top cap with white silicone gasket.
Chemglass Life Sciences SST Pitch Blade Impeller, Low Profile 6L VSA, 6.5" W x 2.5" H Blade
Our SS pitch blade folding impeller assemblies are designed to provide optimum agitation forVertical Side Arm (VSA) vessels.These impellers will improve uplift mixing and increase mass transfer rates while minimizing shear to cultures.They can be used withcap adapter and Dura Drive Overhead Motor.The impellers are made from 316 SS and supplied with a dust shield as well as a locking ring to secure the paddle in a horizontal position once inserted into the flask.
Chemglass Life Sciences Impeller Assembly Only, for 500mL BioProcess Spinner Flasks
Impeller Assembly Only, for 100mL-250mL BioProcess Spinner Flasks
Chemglass Life Sciences 7mm Black Compression Fitting
Microcarrier spinner flasks promote optimal growth of suspension and microcarrier cultures. Indented bottoms, 100mL thru 1000mL, prevent accumulation of microcarrier beads under the impeller paddle. Please Note: The 6L and 8L Versions Do Not Have Dimpled Bottoms. The complete system includes a flask with two angled sidearms and a PTFE paddle with glass shaft that adjusts trough the compression fitting in the cap.
Chemglass Life Sciences Replacement Glass Shaft Only for 100mL Internal Impeller BioProcess Spinner Flasks
Internal Stirring Assembly for 100mL BioProcess Spinner.Flasks
Chemglass Life Sciences 12mm Control Knob Only, for CG-511 Drain Valves
12mm Control Knob Only. Component of the CG-511-01 and CG-511-02 drain valves. Pictured is the complete drain valve, but this item is CONTROL KNOB ONLY.
Chemglass Life Sciences 3-Port SST Thermowell Assy for 3L Spinner Flasks
Our hose barbed 3-port large diameter thermowell assemblies are designed to accommodate a wide variety of RTD's and dial thermometers of different diameters for measuring the process temperature inAngled Side Arm (ASA) Spinner Flasks.All 316L stainless steel tubes have an electropolished finish to a Ra 20u (or better).These assemblies feature a thermowell tube with 0. 375" OD and a 0. 305" ID that will accept all 1/4" thermometer probes.The assemblies include a blue PP open top GL-45 cap with white silicone gasket.
Chemglass Life Sciences Impeller Assembly Only, for 100-500mL Adjustable Hanging Bar Spinner Flasks
Impeller Assembly Only, for 100-500mL Adjustable Hanging Bar Spinner Flasks.
Chemglass Life Sciences Replacement Glass Shaft Only for 250mL Internal Impeller BioProcess Spinner Flasks
Internal Stirring Assembly for 100mL BioProcess Spinner.Flasks
Chemglass Life Sciences Motor Kit, 24/40 Bushing Adapter, 3-Piece Tool Kit (CG-1981-C-24), Motor w/ 2 Batteries
Motor Kit, 24/40 Bushing Adapter, 3-Piece Tool Kit (CG-1981-C-24), Motor w/ 2 Batteries. Easily remove dried-on solids from the interior walls of round bottom flasks without scratching or harming your flask!Chem-spin scraper tools provide an easy method of removing the majority of desired, dried-on solids from the interior walls of round bottom flasks. Motor driven, the spinning chain rapidly and effectively brushes the surface as the loose solids collect on the bottom. Minimal physical effort is required. Tedious, time-consuming, manual scraping with a spatula is eliminated.Motor Kits include everything you need to get started: rotary scraper tools, glass bushing adapters, motors and two 12V batteries.
Bellco Glass, Inc. The bellco sample system attaches to gl45 nozzle allowing the user to take repeated samples into a standard 50ml disposable centrifuge tube. The sampler is designed to connect to an existing pipe by mounting under the open cap. Samples are taken by evacua
The bellco sample system attaches to gl45 nozzle allowing the user to take repeated samples into a standard 50ml disposable centrifuge tube. The sampler is designed to connect to an existing pipe by mounting under the open cap. Samples are taken by evacua
Bellco Glass, Inc. The stainless steel 100mm iob probe cap seal is manufactured from 316l stainless steel and has a red-silicone sealing gasket with a 100mm blue polypropylene screw cap. The stainless steel probe cap seal has four accessory ports surrounding a centrally loc
The stainless steel 100mm iob probe cap seal is manufactured from 316l stainless steel and has a red-silicone sealing gasket with a 100mm blue polypropylene screw cap. The stainless steel probe cap seal has four accessory ports surrounding a centrally loc
Chemglass Life Sciences Individual Tool, Rotary Scraper, Fits 250mL Round Bottom Flasks
Individual Tool, Rotary Scraper, Fits 250mL Round Bottom Flasks. Easily remove dried-on solids from the interior walls of round bottom flasks without scratching or harming your flask!• Stainless steel and PTFE for rapid sample removal• Laser etched as to size and part number• Fits Outer Joint Size 24/40 or Larger• Patent pending designChem-spin scraper tools provide an easy method of removing the majority of desired, dried-on solids from the interior walls of round bottom flasks. Motor driven, the spinning chain rapidly and effectively brushes the surface as the loose solids collect on the bottom. Minimal physical effort is required. Tedious, time-consuming, manual scraping with a spatula is eliminated.
CELLTREAT Scientific Products Transfer Assembly for 3L Fernbach Flask, Sterile
Transfer Assembly for 3L Fernbach Flask, Sterile
Ace Glass, Inc. Head, 60mm Duran flange, O-ring groove, #15 center, (2)#15, (1)#7
Head, 60mm Duran flange, O-ring groove, #15 center, (2)#15, (1)#7